Thermo-Dynamics LMD100 ERP_037822

Thermo-Dynamics Oil Fired Package Boiler, Series: LMD, 0.85 AFUE, 140 MBH Input, 118.3 MBH Heating BTU, 102.9 MBH Net BTU Rating, 1 gal/hr, 1-1/4 in Supply/Return Connection, Oil Fuel, Direct Vent, Carlin EZ1 Burner, 5.5 gal Input, 8 x 8 in Square, 15 ft H Chimney Size, 5 in Vent Dia, Steel, 19-1/8 in W x 20 in H x 36 in D

• A wet-base design, a horizontal tube and a 2-pass heat exchanger make this one of the best-designed, best-heating boilers on the market
• Swing out burner door
• The low water content provides heat or hot water delivery within minutes of start-up
• Forced draft burner performs with minimal chimney draft
• The compatibility with indirect storage tanks provides enough hot water to meet the comfort requirement of virtually any home
• One-piece boiler construction ensures years of trouble-free service and there are no push nipples or O-rings to leak
• There are no push nipples or O-rings to leak
• The compact design saves space, yet it's capable of 3 firing rates
• The low, 5-1/2 gal water content provides heat and hot water delivery within minutes of start up, the low mass concept reduces standby losses associated with boilers during off cycles and provides nearly instant heating with less fuel consumption
• 83 - 85% AFUE, the high efficiency obtained with the LM boiler are due to the design to the heat exchanger, a 2-pass, wet base, Scotch Marine design
• 0.75 - 1.1 multiple firing rates- 1-boiler can be fired at 3-different rates, offering versatility and keeping costs low, IBR listed at each firing rate, each unit is supplied with nozzles and labels for all 3-rates
• Standing 36 in L x 19 in W x 19-3/4 in H, this compact boiler not only saves space but can easily be installed in areas not approved for other boilers, the LM Series is approved for both closet and alcove installation on combustible flooring
• Each boiler is constructed and hydrostatically tested in accordance with ASME boiler code, the capacity and efficiency are rated in accordance with the standards of the institute of boiler and radiator manufacturers (IBR)
• Lifetime limited warranty
• Built-in air scoop purges air from the system providing a quiet, trouble-free hot water heating system without the use of external devices
• Easy cleaning and maintenance accessibility to combustion areas and the open tubes make it easy for the service technician to thoroughly clean the boiler
• The LM-series can be cleaned from either end by simply removing (8) brass nuts and the burner and clean-out door is a hinged, swing-away door

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Thermo_Dynamics_LMD_75_110_Manual.pdf