Contact 1-800-314-3578
Designed for boiler low-water cut-off protection. A snap-through standoff mounting device is available for the series 26. Optional power outage feature resets after nuisance outages. The optional reset button is used when the device has been deactivated because of low-water condition. Reset is functional only if water has returned to normal level. Built-in 3 sec time delay is standard. Upto 90 sec available for increasing and decreasing levels.
Warrick® Cut-Off Panel Board, Series: 26, 120 VAC Primary, 12 VAC Secondary, 1.5 mA, 50/60 Hz, (1) NO, (1) NC, 10 A Resistive 1/3 hp at 120/240 VAC Contact, Standoff Mounting, -40 to 150 deg F, 2-3/16 in W x 2-1/2 in H x 1-7/8 in D
| Amperage Rating | : | 1.5 mA |
| Contact Configuration | : | (1) NO, (1) NC |
| Contact Rating | : | 10 A Resistive 1/3 hp at 120/240 VAC |
| Dimensions | : | 2-3/16 in W x 2-1/2 in H x 1-7/8 in D |
| Frequency Rating | : | 50/60 Hz |
| Mounting Type | : | Standoff |
| Temperature Rating | : | -40 to 150 deg F |
| Voltage Rating | : | 120 VAC Primary, 12 VAC Secondary |
- Non powered contacts
- LED monitoring
- Test feature
- AC current minimizes electrolysis
- Snap-thru standoff mounting
- Compact size
- Power outage, time delay feature
- UL "limit control"
- Direct mode of operation
- 0 - 100 kohm factory set sensitivity
- Spade connection terminal-style
- 1/16 in panel stand-off style
Instruction/Installation Manual