Contact 1-800-314-3578
B series transfer pumps are designed to provide efficient pumping of #1 to #6 fuel oils, in capacities from 80 - 290 gal/hr, at pressures up to 500 lb/sq-in (except #1 oil). With high-density gray iron body construction, heat treated alloy steel gears and shafts and special antifriction bearings. B series transfer pumps offer superior durability and high mechanical efficiency. Double lip Viton seals are standard. These pumps are also available in pump and motor packages. Available in 115/230 V single phase or 230/460 V three phase, simplex, duplex automatic and duplex manual configurations. All B series pumps are UL approved.
Webster® Oil Transfer Pump, Series: SPMB, 159 gal/hr, 115 - 230 VAC, 1/4 hp at 25 and 100 lb/sq-in, 1/2 hp at 200 lb/sq-in, 3/4 hp at 300 lb/sq-in, 60 Hz, 1725 rev/min Speed, 200 ft Max Feet of Head, 4-Bolt Foot Mounting, 80 lbf/sq-in Working, Cast Iron Body, 17.41 in L x 4 in W x 8 in D, Gray
| Body Material | : | Cast Iron |
| Color | : | Gray |
| Dimensions | : | 17.41 in L x 4 in W x 8 in D |
| Flow Rate | : | 159 gal/hr |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/4 hp at 25 and 100 lb/sq-in, 1/2 hp at 200 lb/sq-in, 3/4 hp at 300 lb/sq-in |
| Maximum Feet of Head | : | 200 ft |
| Mounting Type | : | 4-Bolt Foot |
| Speed Rating | : | 1725 rev/min |
| Voltage Rating | : | 115 - 230 VAC |
| Working Pressure | : | 80 lbf/sq-in |
- Double lip type viton seal
- Use of external line filter recommended
- 15 in Hg maximum inlet vacuum
- External pressure regulating or relief valve recommended
- Motors are clockwise as viewed from motor shaft end
- 1/2 in NPTF side inlet and outlet port
Catalog