Contact 1-800-314-3578
Zoeller® Sump Pump, M98 Model, 115 VAC, 9.4 A, 60 Hz, 1/2 hp, 1725 rev/min Speed, 72 gal/min, 1 -Phase, 1/2 in NPT Discharge, 15 ft L Cord, 72 gal at 5 ft, 61 gal at 10 ft, 45 gal at 15 ft, 25 gal at 20 ft Capacity, 23 ft Max Feet of Head, 130 deg F, Engineered Plastic Impeller, Cast Iron, 10-1/8 in L x 7-3/8 in W x 12-1/16 in H
| Amperage Rating | : | 9.4 A |
| Capacity | : | 72 gal at 5 ft, 61 gal at 10 ft, 45 gal at 15 ft, 25 gal at 20 ft |
| Cord Length | : | 15 ft |
| Dimensions | : | 10-1/8 in L x 7-3/8 in W x 12-1/16 in H |
| Discharge Size | : | 1/2 in NPT |
| Flow Rate | : | 72 gal/min |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/2 hp |
| Impeller Material | : | Engineered Plastic |
| Material | : | Cast Iron |
| Maximum Feet of Head | : | 23 ft |
| Model | : | M98 |
| Phase | : | 1 |
| Speed Rating | : | 1725 rev/min |
| Temperature Rating | : | 130 deg F |
| Voltage Rating | : | 115 VAC |
- Corrosion-resistant powder-coated epoxy finish
- Durable, cast iron construction
- Cast iron switch case, motor, pump housing and base
- No sheet metal parts to rust or corrode
- All castings are cast iron class 25-30 25000# tensile strength
- Stainless steel screws, guard, handle, arm and seal assembly
- Float operated two pole mechanical switch
- Permanent split capacitor motor, oil-filled and hermetically-sealed, automatic reset thermal overload protection
- Bearings upper and lower oil-fed cast iron
- Carbon and ceramic shaft seal
- Entire unit pressure-tested after assembly
- Watertight, neoprene square ring between motor and pump housing
- Passes 1/2 in spherical solids
- No screens to clog
- 9-1/2 in on-point
- 3 in off-point
Instruction/Installation Manual