Contact 1-800-314-3578
Zoeller® Sewage Pump, Series: 290, 200 V, 20.5 A, 60 Hz, 2 hp, 3450 rev/min Speed, 214 gal/min, 1 -Phase, 2 or 3 in NPT Discharge, 75 ft Max Feet of Head, Insulation Class: B, 130 deg F, Cast Iron Impeller, 12-7/8 in W x 19-5/16 in H, Cast Iron, Epoxy Powder-Coated
| Amperage Rating | : | 20.5 A |
| Dimensions | : | 12-7/8 in W x 19-5/16 in H |
| Discharge Size | : | 2 or 3 in NPT |
| Finish | : | Epoxy Powder-Coated |
| Flow Rate | : | 214 gal/min |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 2 hp |
| Impeller Material | : | Cast Iron |
| Insulation Class | : | B |
| Material | : | Cast Iron |
| Maximum Feet of Head | : | 75 ft |
| Phase | : | 1 |
| Speed Rating | : | 3450 rev/min |
| Temperature Rating | : | 130 deg F |
| Voltage Rating | : | 200 V |
- Durable, cast iron constructed switch case, base, motor and pump housing
- No sheet metal parts to rust or corrode
- All cast iron class 30 30000# tensile strength
- Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
- Oil-filled, hermetically-sealed, automatic reset thermal overload protected (1 PH only) motor
- Maximum temperature for sewage or dewatering: 130 deg F standard
- If over 130 deg F, consult factory
- Shaft seal - stainless steel carbon and ceramic rotary
- 1117 carbon steel motor shaft (single seal models)
- Corrosion-resistant powder-coated epoxy finish
- Upper and lower ball bearing running in a bath of oil
- Neoprene square ring and gasket
- All models pass 2 in spherical solids
- 100% computerized tested
Catalog