Contact 1-800-314-3578
Zoeller® Sump Pump, 115 V, 5.5 A, 60 Hz, 1/3 hp, 3450 rev/min Speed, 38 gal/min, 1 -Phase, 1-1/2 in NPT Discharge, 18 ft Max Feet of Head, Ball Bearing, 104 deg F, Engineered plastic Impeller, Cast Iron, 8-3/32 in W x 11 in H, Enamel
| Amperage Rating | : | 5.5 A |
| Bearing Type | : | Ball |
| Dimensions | : | 8-3/32 in W x 11 in H |
| Discharge Size | : | 1-1/2 in NPT |
| Finish | : | Enamel |
| Flow Rate | : | 38 gal/min |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/3 hp |
| Impeller Material | : | Engineered plastic |
| Material | : | Cast Iron |
| Maximum Feet of Head | : | 18 ft |
| Phase | : | 1 |
| Speed Rating | : | 3450 rev/min |
| Temperature Rating | : | 104 deg F |
| Voltage Rating | : | 115 V |
- Oil-filled, hermetically-sealed motor with automatic reset thermal overload protection
- Rugged, cast iron motor housing with corrosion-resistant, baked-on enamel finish
- Efficient heat sink for heat dissipation
- Engineered plastic base and pump housing with no screen
- Passes 3/8 in spherical solids
- Reliable integrated vertical switch
- Carbon and ceramic rotary seal
- Watertight, NBR rubber seal between motor and cover
- Stainless steel screws and hardware
- 6-1/2 in auto on point, 2-1/2 in auto off point
- Fits 12 in Dia pits
- 100% factory tested after assembly
- Permanent split capacitor type
- Class B insulation
- Automatic operation
- UL listed 3 prong plug cord type, 9 ft cord length
- Ball bearing upper and lower
- Carbon and ceramic mechanical seals
- Non-clogging vortex impeller type
- 410 stainless steel motor shaft
Specification Sheet